xTool D1 Pro 20W LightBurn Material Library | D1 Pro Only — Not Original D1 | 200 Presets
xTool D1 Pro 20W LightBurn Material Library | D1 Pro Only — Not Original D1 | 200 Presets
COMPATIBILITY — XTOOL D1 PRO 20W ONLY
This listing is for the xTool D1 Pro 20W. It is not the original/regular xTool D1 20W library. Please verify that your machine says “D1 Pro” before purchasing.
Premade LightBurn material library for the xTool D1 Pro 20W diode laser with 200 cut and engraving presets in an easy-to-load .CLB file.
This is a PREMADE LightBurn material library organized for the xTool D1 Pro 20W. It gives you useful starting-point settings so you can spend less time building a library from scratch and more time making.
WHAT YOU GET
- 1 LightBurn .CLB material library
- 56 material entries
- 200 cut / engrave / mark presets
- How-to-install text guide
- Instant digital download
MATERIALS INCLUDED
- 12 x 12x 1/8 Basswood Plywood
- 12 x 12x 1/8 Birch Plywood
- 12 x 12x 1/8 Cherry Plywood
- 12 x 12x 1/8 Mahogany Plywood
- 12 x 12x 1/8 Pine Plywood
- 12 x 12x 1/8 Walnut Plywood
- 2mm Acrylic_brown
- 3mm Ash plywood
- 3mm Basswood plywood
- 3mm Birch plywood
- 3mm Black Acrylic Sheet
- 3mm Blood Red Acrylic Sheet
- 3mm Brown Acrylic Sheet
- 3mm Bubinga plywood
- 3mm Cheery wood plywood
- 3mm Chrome Yellow Acrylic Sheet
- 3mm Dark Red Acrylic Sheet
- 3mm Deep Green Acrylic Sheet
- 3mm Fluorescent Yellow Acrylic Sheet
- 3mm Fraxinus Mandshurica Plywood
- 3mm Green Acrylic Sheet
- 3mm Maple plywood
- 3mm Orange Acrylic Sheet
- 3mm Red Acrylic Sheet
- 3mm Red Acrylic Sheet
- 3mm Red Glitter Acrylic Sheet (Opaque, Glossy)
- 3mm Red oak plywood
- 3mm Walnut plywood
- 3mm White oak plywood
- 3mm Yellow Acrylic Sheet
- 5mm Acrylic_brown
- 5mm Acrylic_green
- 5mm Acrylic_red
- 5mm Acrylic_yellow
- 5mm Black Acrylic Sheetcm
- 6mm Ash plywood
- 6mm Basswood plywood
- 6mm Birch plywood
- 6mm Bubinga plywood
- 6mm Cheery wood plywood
- 6mm Maple plywood
- 6mm Red oak plywood
- 6mm Walnut plywood
- 6mm White oak plywood
- Bamboo Plant Label
- Beech Phone Stand
- Black Metal Mouse Pad
- Cork Desk Pad
- Laser Engraving Rubber Mat
- Metal Business Cards Blue
- Pine Coaster
- Round Wooden Keychain
- Silver Stainless Steel Tag
- Stainless Steel Mug 20oz
- Stainless Steel Mug20oz
- Stainless Steel Necklace
HOW TO USE
- Download and unzip your files.
- Open LightBurn and open the Library panel.
- Click Load and select the included .CLB file.
- Choose the material and preset you want to use.
- Run a small test and fine-tune for your exact material and machine setup.
COMPATIBILITY
Designed for: xTool D1 Pro 20W
File format: .CLB LightBurn Material Library
Software required: LightBurn (not included)
IMPORTANT
Laser settings are starting points. Results can vary with material composition, thickness, focus, lens condition, air assist, machine setup, firmware and other variables. Always run a material test before a final job.
DIGITAL DOWNLOAD ONLY
No physical item will be shipped. Because this is a digital product, please verify your machine/model before purchasing.
Myers Woodshop is not affiliated with xTool or LightBurn Software. Brand and product names are used only to identify compatibility.