xTool D1 Pro 10W LightBurn Material Library | 188 Laser Settings Presets | .CLB Digital Download
xTool D1 Pro 10W LightBurn Material Library | 188 Laser Settings Presets | .CLB Digital Download
Premade LightBurn material library for the xTool D1 Pro 10W diode laser with 188 cut and engraving presets in an easy-to-load .CLB file.
This is a PREMADE LightBurn material library organized for the xTool D1 Pro 10W. It gives you useful starting-point settings so you can spend less time building a library from scratch and more time making.
WHAT YOU GET
- 1 LightBurn .CLB material library
- 54 material entries
- 188 cut / engrave / mark presets
- How-to-install text guide
- Instant digital download
MATERIALS INCLUDED
- 12 x 12x 1/8 Basswood Plywood
- 12 x 12x 1/8 Birch Plywood
- 12 x 12x 1/8 Cherry Plywood
- 12 x 12x 1/8 Mahogany Plywood
- 12 x 12x 1/8 Pine Plywood
- 12 x 12x 1/8 Walnut Plywood
- 12 x 12x 1/8 in Basswood Plywood
- 3mm Ash plywood
- 3mm Basswood plywood
- 3mm Birch plywood
- 3mm Black Acrylic Sheet
- 3mm Blood Red Acrylic Sheet
- 3mm Brown Acrylic Sheet
- 3mm Bubinga plywood
- 3mm Cheery wood plywood
- 3mm Chrome Yellow Acrylic Sheet
- 3mm Dark Red Acrylic Sheet
- 3mm Deep Green Acrylic Sheet
- 3mm Fluorescent Yellow Acrylic Sheet
- 3mm Fraxinus Mandshurica Plywood
- 3mm Green Acrylic Sheet
- 3mm Maple plywood
- 3mm Orange Acrylic Sheet
- 3mm Red Acrylic Sheet
- 3mm Red Acrylic Sheet
- 3mm Red Glitter Acrylic Sheet (Opaque, Glossy)
- 3mm Red oak plywood
- 3mm Walnut plywood
- 3mm White oak plywood
- 3mm Yellow Acrylic Sheet
- 5mm Acrylic_brown
- 5mm Acrylic_green
- 5mm Acrylic_red
- 5mm Acrylic_yellow
- 6mm Ash plywood
- 6mm Basswood plywood
- 6mm Bubinga plywood
- 6mm Cheery wood plywood
- 6mm Maple plywood
- 6mm Red oak plywood
- 6mm Walnut plywood
- 6mm White oak plywood
- Bamboo Plant Label
- Beech Phone Stand
- Black Metal Mouse Pad
- Cork Desk Pad
- Laser Engraving Rubber Mat
- Metal Business Cards Blue
- Pine Coaster
- Round Wooden Keychain
- Silver Stainless Steel Tag
- Stainless Steel Mug 20oz
- Stainless Steel Mug20oz
- Stainless Steel Necklace
HOW TO USE
- Download and unzip your files.
- Open LightBurn and open the Library panel.
- Click Load and select the included .CLB file.
- Choose the material and preset you want to use.
- Run a small test and fine-tune for your exact material and machine setup.
COMPATIBILITY
Designed for: xTool D1 Pro 10W
File format: .CLB LightBurn Material Library
Software required: LightBurn (not included)
IMPORTANT
Laser settings are starting points. Results can vary with material composition, thickness, focus, lens condition, air assist, machine setup, firmware and other variables. Always run a material test before a final job.
DIGITAL DOWNLOAD ONLY
No physical item will be shipped. Because this is a digital product, please verify your machine/model before purchasing.
Myers Woodshop is not affiliated with xTool or LightBurn Software. Brand and product names are used only to identify compatibility.