Gweike G2 Max 50W Fiber Laser LightBurn Material Library | 150mm Lens | .CLB Digital Download

Premade LightBurn material library for the Gweike G2 Max 50W fiber laser with the standard 150mm marking field, including 9 manufacturer-reference .CLB presets.

This is a PREMADE LightBurn material library organized specifically for the Gweike G2 Max 50W. It gives you clearly labeled starting-point settings so you can spend less time entering parameters and more time making.

What You Get

• 1 LightBurn .CLB material library
• 8 material categories
• 9 mark / cut presets
• How-to-install text guide
• Instant digital download

Materials Included

• Black Aluminum
• Stainless Steel
• Brass
• Leather
• Non-Transparent Plastic
• Titanium Steel
• Black Acrylic
• Coated Metal

How to Use

1. Download and unzip your files.
2. Open LightBurn and open the Library panel.
3. Click Load and select the included .CLB file.
4. Choose the material and preset you want to use.
5. Run a small test and fine-tune for your exact material and machine setup.

Compatibility

Designed for: Gweike G2 Max 50W with the standard 150mm marking field
Laser type: 1064nm ytterbium fiber
File format: .CLB LightBurn Material Library
Software required: LightBurn with Galvo support (not included)

Important

These are manufacturer-reference starting points, not guaranteed final settings. Results can vary with material composition, thickness, focus, lens condition, machine calibration, firmware and other variables. Always run a material test before a final job. The brass cut preset follows the manufacturer's published 0.5mm brass demonstration and should be tested cautiously before use.

Digital Download Only

No physical item will be shipped. Please verify that you have the Gweike G2 Max 50W with the 150mm field before purchasing. This library is not intended for the Gweike G2 20W or G2 Pro 30W.

Myers Woodshop is not affiliated with Gweike or LightBurn Software. Brand and product names are used only to identify compatibility.